Instructions for making valentine hearts
Heart pattern, this pattern is 19 cm. The size can be changed.
Materials: striped and plaid cotton fabric, wadding, thread, ribbon.
Cut 2x the whole heart from the striped fabric according to the pattern, and 1x piece for pocket. Cut the same from the plaid fabric.
First, fold the upper part of the pocket inward twice and sew on the machine. Place the pocket on the heart, pin, and sew the edges on the machine.
Place the fold ribbon on the part with the pocket so that each edge of the ribbon points to one half of the heart.
Place the heart with the pocket on the second heart right sides together, pin as shown in the picture, so that the pins are pointing outwards.
Sew the heart, don’t forget the tie-off the the sewing at the beginning and the end. Start sewing on the side. If we pinned the heart as shown in the picture, we can sew over the pins. Sew all around the heart, leaving only a 5 cm opening. Remove the pins.
Cut around the heart close to the stitching.
Turn the heart right side out.
Gradually stuff the whole heart with wadding.
Sew the opening shut by hand.
1 comment on “Valentine hearts”
This looks so cool! Thanks for sharing. I may try it out 🙂
Comments are closed.